Products
FC P1.27 180°DIP 14P
Key words:
ARC
Classification:
Detail description
1. Scope of application:
This work specification applies to: FC (CONN.)
Connection with PCB: DIP
Suitable Cable Size: 28AWG (HUNG FU)
2. Related specifications:
EIA-364 : Test Procedures for Electronic Connectors and Connectors
UL STD-94: Specifications for testing the flame retardancy of plastic equipment parts and equipment.
Refer to industry norms
3. Construction, dimensions, materials
See block diagram.
4.Standard status:
1) Rated voltage: AC/DC 250V
2) Rated current: 1.2A
3) Temperature and humidity range:
Operating temperature range: -40~+105°C; Storage temperature range: -40~+85°C;
5. Performance
5.1 Structure
|
|
project |
Test Methods |
Specifications |
|
1 |
Exterior |
visual inspection, size measurement |
Meet the drawing requirements |
5.2 Electrical properties
|
|
project |
Test Methods |
Specifications |
|
1 |
contact resistance |
20mV Max. open circuit voltage; 100mA Max. test current. |
30mΩ Max. |
|
2 |
Insulation resistance |
DC 500V between adjacent terminals |
1000MΩ Min. |
|
3 |
Pressure test |
AC 250V between adjacent terminals, 1 minute. |
No breakdown |
5.3 Mechanical properties
|
|
project |
Test Methods |
Specifications |
|
1 |
Terminal retention In Housing |
Pull out the terminal vertically from the rubber core groove at a constant speed of 25~100mm/min |
300gf/terminal Min. |
|
2 |
Durability |
One cycle = 1Mating & Un-Mating assembly requires the use of assembly tools and each cycle to replace a Cover Tin-plated product durability: 30 times Gold-plated product durability: 100 times |
Pressing force changes within 100gf Contact impedance is less than twice the initial specification |
5.4 Durability
|
|
project |
Test Methods |
Specifications |
|
1 |
Vibration resistance |
The terminals are connected in series with a current of 0.1A dc, amplitude 1.5mm, frequency 10-55-10Hz, X, Y, Z direction for 2 hours each, a total of 6 hours |
The contact impedance is less than twice the initial specification; Discontinuous conduction within 1μs; Appearance is normal |
|
2 |
Impact resistance |
The terminals are connected in series with a current of 0.1A dc, the acceleration is 490m/s 2 , the X, Y, and Z directions are each 11ms, each 3 times, a total of 18 times |
|
|
3 |
cold resistance |
Storage time 96H in temperature -40℃+0℃/-3℃ |
1. The contact impedance is less than twice the initial specification 2. Appearance: no abnormality |
|
4 |
heat resistance |
240H at temperature 105°C+3°C/-0°C |
|
|
5 |
Moisture resistance |
Temperature 40±3℃; Humidity 90~95% RH, storage time 96H |
|
|
6 |
Salt spray test |
Temperature 35±2℃; salt water specific gravity 5±1% spray test 48H |
|
|
7 |
Thermal shock |
-40°C+0°C/-3°C; 105°C+3°C/-0°C for 30 minutes each, for a total of 10 cycles |
|
|
8 |
Tin Wetting |
Dipping tin temperature 245±5℃ (Sn: Lead Free); time 3 ± 0. 5S |
Eat tin full, more than 95% |
Pre
Pre
4P POWER FEMALE TYPE 1 AND TYPE 3
Related products
Message consultation
Ting Ye Technology (Shenzhen) Co., LTD
Address: No.12, Shanmen Third Industrial Zone, Songgang Street, Baoan District, Shenzhen City
Tel：+86755-27060596
Fax：+86755-27060597
Email：china@arc-electro.com.cn
Tinghui Industrial Co., LTD
Address: No. 1, Lane 13, Lane 313, Section 6, New North Road, Taishan District, New Taipei City
Tel：+886-2-2906-9883
Fax：+886-2-2906-9882
Email：sales@ arc-electro.com
Address: No.12, Disan Industrial Zone, Shanmen, Songgang Street, Baoan District, Shenzhen
Tel：+86755-27060596
Fax：+86755-27060597
Email：china@arc-electro.com.cn
Copyright © 2023 Ting Ye Technology (Shenzhen) Co., LTD Powered by : www.300.cn SEO Business license